Question 1

How much does epoxy flooring cost in the GTA?

Accepted Answer

Residential epoxy flooring in the Greater Toronto Area costs $5–$9 per square foot for a full-flake system with a polyaspartic topcoat. Metallic and decorative finishes run $8–$12 per square foot. Commercial systems range from $7–$14 per square foot depending on thickness and chemical-resistance requirements. Every quote includes surface grinding, crack repair, and materials.

Question 2

How much does it cost to epoxy a 2-car garage in Toronto?

Accepted Answer

A typical double garage (400–480 sq ft) in the GTA costs $2,200–$3,800 for a full-flake epoxy system with polyaspartic topcoat, installed. Single-car garages typically run $1,400–$2,300. Final price depends on slab condition — old coatings or significant crack repair add to the quote.

Question 3

Is epoxy cheaper than replacing the concrete?

Accepted Answer

Significantly. Replacing a garage slab costs $15–$25 per square foot plus demolition; coating a structurally sound slab costs $5–$9 per square foot and protects it from further salt and freeze-thaw damage. Coating is almost always the better investment unless the slab is structurally failing.

Question 4

Do you charge for quotes or assessments?

Accepted Answer

No — assessments and quotes are free anywhere in our GTA service area. We measure the space, test the slab for moisture, inspect for damage, and give you a written quote with no obligation.

Question 5

Are cheap epoxy kits from the hardware store worth it?

Accepted Answer

DIY kits cost $150–$400 but use thin, water-based epoxy applied over unground concrete — they commonly peel within 1–3 years from hot tire pickup. Professional systems are 5–10× thicker, applied over diamond-ground concrete, and last 15–25 years. The redo cost of a failed kit usually exceeds the price difference.

Question 6

How long does an epoxy floor installation take?

Accepted Answer

Most residential garages are completed in 1–2 days: grinding and repairs first, then base coat, flake broadcast, and topcoat. Larger commercial projects take 3–7 days depending on square footage and prep. We provide a written timeline with every quote.

Question 7

How long before I can walk or park on the new floor?

Accepted Answer

Light foot traffic is safe after 24 hours. Vehicles can park on the floor after 72 hours. Full chemical cure takes about 7 days — avoid dragging heavy steel objects across the surface in the first week.

Question 8

Can epoxy be installed in winter in Ontario?

Accepted Answer

Yes — our polyaspartic systems cure at temperatures as low as -10°C, so insulated or heatable garages can be coated year-round. Winter is our quietest season, which usually means faster scheduling.

Question 9

Will my business need to close during installation?

Accepted Answer

Usually not. Most commercial installations are scheduled overnight or on weekends so the space stays operational. Fast-curing polyaspartic systems can return a floor to service in under 24 hours.

Question 10

Do you handle crack repair and surface prep?

Accepted Answer

Always — it is included, not an add-on. Every install starts with diamond grinding to a CSP 2–3 profile, plus crack repair and joint filling with polymer-modified mortar. Surface prep is the single biggest factor in how long a coating lasts.

Question 11

Does the installation create dust inside my home?

Accepted Answer

Minimal. All grinding is done with HEPA-filtered dust extraction and we seal interior doors during prep — the process produces less airborne dust than drywall sanding. We leave the space broom-clean at handover.

Question 12

How long will my epoxy floor last?

Accepted Answer

A professionally installed epoxy-polyaspartic system lasts 15–25 years in a residential garage with proper surface preparation. Our workmanship is backed by a written 7-year warranty against peeling, delamination, and premature wear.

Question 13

Will the coating handle road salt and slush?

Accepted Answer

Yes — this is exactly what our systems are specified for. The polyaspartic topcoat is chemically resistant to chlorides, so salt-laden slush dripping off your vehicle sits on the coating instead of soaking into the concrete. Bare GTA garage slabs typically show salt scaling within 5–10 winters; coated slabs do not.

Question 14

What is hot tire pickup, and will it ruin my floor?

Accepted Answer

Hot tire pickup is when warm tires soften a cheap coating and peel it as the car cools — the #1 failure mode of DIY epoxy kits. Professional systems bond to diamond-ground concrete with industrial-grade resins, so hot tires cannot lift the coating. Our warranty explicitly covers it.

Question 15

Will my epoxy floor yellow in sunlight?

Accepted Answer

Not with our system. Standard epoxy yellows under UV exposure, which is why we always finish with a UV-stable polyaspartic topcoat. Garages with windows, glass doors, or skylights keep their colour permanently.

Question 16

Is epoxy flooring slippery when wet?

Accepted Answer

Full-flake systems have natural texture from the vinyl flakes that provides grip even when wet — comparable to a sidewalk. For wetter environments (pool rooms, commercial kitchens), we broadcast an aluminum-oxide anti-slip additive into the topcoat.

Question 17

How do I clean and maintain an epoxy floor?

Accepted Answer

A dust mop weekly and an occasional wash with a pH-neutral cleaner is all it needs — no waxing or resealing on a residential schedule. Avoid harsh acids and citrus degreasers. In spring, rinse off accumulated winter salt to keep the finish looking new.

Question 18

What does your warranty cover?

Accepted Answer

Our written 7-year workmanship warranty covers delamination, peeling, and premature wear under normal use. It covers hot tire pickup explicitly. It does not cover damage from structural slab movement or impact gouges from dropped heavy objects.

Question 19

Can chips or scratches be repaired without redoing the floor?

Accepted Answer

Yes — most spot repairs are straightforward. Flake systems are especially forgiving because patched areas blend into the existing broadcast pattern. A typical spot repair takes under an hour.

Question 20

Do oil and chemical spills stain epoxy?

Accepted Answer

No. Oil, coolant, brake fluid, and most household chemicals wipe off a cured epoxy-polyaspartic floor without staining. That is one of the main reasons mechanics and collectors coat their floors.

Question 21

What is the difference between epoxy and polyaspartic?

Accepted Answer

Epoxy is a thick, high-build resin with excellent adhesion — ideal as a base coat. Polyaspartic cures faster, never yellows in UV, and tolerates temperatures from -10°C to +35°C — ideal as a topcoat. We pair them: epoxy base for build and bond, polyaspartic top for UV stability and salt resistance. That hybrid outperforms either product alone.

Question 22

Can you install epoxy over existing concrete or old coatings?

Accepted Answer

Over sound concrete, yes — we diamond-grind the surface and repair cracks first. Old coatings and paints must be fully removed by grinding before recoating; applying epoxy over an old coating transfers the old coating's failure to the new floor.

Question 23

Which flake colour should I choose?

Accepted Answer

Light grey full-flake is the most popular choice in the GTA — it brightens the garage, hides dust and tire marks between cleanings, and suits modern interiors. Dark charcoal blends read more dramatic but show dust sooner. We bring physical sample boards to every assessment.

Question 24

Is epoxy a good choice for basements?

Accepted Answer

Yes, with one caveat: basement slabs must be moisture-tested first. We use moisture-tolerant primers on slabs with elevated readings. A coated basement floor is seamless, mold-resistant, and far more durable than paint, laminate, or carpet over concrete.

Question 25

Epoxy, polished concrete, or tiles — which is best for a garage?

Accepted Answer

For Ontario garages, an epoxy-polyaspartic flake system wins on salt resistance, impact tolerance, and cost. Polished concrete is beautiful but more porous to salt unless densified and sealed aggressively. Interlocking tiles trap salty meltwater underneath against the slab. For showrooms and interiors, polished concrete is a strong choice.

Frequently Asked Questions

Cost & Pricing