Garage Floor Epoxy in Whitby
From Brooklin new builds to Port Whitby bungalows — garage epoxy done right
Whitby garages range from brand-new poured slabs in Brooklin's booming subdivisions to mature concrete in Port Whitby homes where decades of road salt and oil drips have done their damage. Pure Coatings Epoxy handles both — new-build prep that ensures long-term adhesion and older-slab remediation including oil stain treatment — across all of Whitby with no Durham Region travel surcharge.
Why Whitby Garages Choose Pure Coatings
Brooklin's new-build garage wave
Brooklin is one of Durham Region's fastest-growing communities, adding hundreds of new homes annually. The garage slabs in these developments come off the builder with a steel-trowelled finish and curing compound that blocks epoxy adhesion entirely. We diamond-grind Brooklin slabs to a CSP 2–3 profile and verify moisture levels before coating — the non-negotiable prep that separates a floor that lasts 20 years from one that delaminates by its third winter.
Oil stain treatment in older Whitby garages
Port Whitby and Rolling Acres have established homes where years of vehicle parking have left oil contamination baked into the top layer of the concrete. Standard surface grinding removes this layer entirely, but we also apply a targeted degreaser before the grind pass on heavily contaminated slabs. Coating over untreated oil contamination is the second most common cause of epoxy failure — we eliminate it at prep.
Thickson Road and Taunton Road commuter zones
Whitby's busy commuter corridors — Thickson Road, Taunton Road, and Baldwin Street — connect residential subdivisions to Highway 401 and Whitby GO. The households in these areas consistently run two vehicles through heavy winter salt conditions, which is exactly what our polyaspartic topcoat is designed to resist.
Garage Floor Epoxy Pricing in Whitby
Whitby double garages typically run $2,100–$3,700 for full-flake epoxy with polyaspartic topcoat. Oil degreasing treatment on contaminated slabs is included in surface prep.
Call (437) 249-3110 for Exact PricingOur Installation Process
Free Assessment
We test moisture levels, inspect existing damage, and recommend the right system for your slab.
Diamond Grinding
We grind the concrete to CSP 2–3 and repair cracks or joints before any product is applied.
Epoxy Base Coat
A moisture-tolerant epoxy primer and body coat is rolled and back-rolled for uniform coverage.
Flake or Metallic Broadcast
Full flake, partial flake, metallic, or quartz is broadcast while the epoxy is wet.
Polyaspartic Topcoat
Two coats of UV-stable polyaspartic seal the system. Walkable in 24 hours.
Whitby Neighbourhoods We Serve
Garage Floor Epoxy in Whitby — Questions
Can you coat a Whitby garage floor that has oil stains?
Yes. Oil contamination is addressed during surface preparation with a targeted degreaser application followed by diamond grinding to remove the contaminated concrete layer entirely. We do not coat over untreated oil — it is a guaranteed failure point.
My Whitby home is new construction in Brooklin — when can the garage be coated?
Minimum 28 days after the concrete pour, but 60–90 days is better. We test the slab at your free assessment to confirm cure completeness and moisture levels before setting an install date.
Is there a travel fee for Whitby garage epoxy projects?
No — Whitby is within our standard service zone. The per-square-foot price is the same as for comparable projects in Ajax or Oshawa.
Learn more about our garage floor epoxy systems or explore all epoxy services in Whitby.
Ready for Floors That Actually Last?
Tell us about your project. We'll assess your space, recommend the right system, and deliver a detailed written quote within 24 hours. And if your floor isn't a good candidate for coating, we'll tell you — and tell you why.